SCL-L012 Infrared/Laser Billet Cut-to-Length System

The all-digital non-touchingCenterRise M&C ly cast product It 24 strands casting products  basically2strands The features of the system

1. The system adopts advanced digital image processing technology (non-touching flame castingthe .

the can be cut . T24 strands3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1.

Fig 1

The functions of the system

1. Applicable to all kinds of continuous casting machine flame 2. Adopt advanced digital image pickup technology.

3. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding.

4. The system provides abundant interfaces, which can communicate with with the PLC. 

7. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose.

8. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user’s requirements.

9. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters.

10. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc.

11. Provide automatic, manual cutting control.

12. The detection and cutting precision is high, and the controllable precision is ±5mm.

The extension of the system

The system can install 1 to 8 cameras. Generally, when one camera cannot meet the requirements, the systemroller line products strand , which ensures that the center of the viewing angle, the billet head, and the fixed-length mark are vertical to improve the cutting and fixed-length accuracy.

The technical parameters

1.Numbers of caster stands: maximum 24 strands

2.Cutting method: flame cutting

3.Matching casting speed: ≤6.5m/s

4.Temperature range of billets: <1000℃

5.Measurement accuracy: ±5mm

6.Cut-to-length range: 3-18m

7.Signal transmission: TCP/IP

8.Number of signals: pre-cut, cut